Skip to content

Grade 2 · Mathematics · FireFlash pack

Measure and Move

Understand and compare lengths using units, rulers, and number lines.

Measuring a length means counting equal units laid end to end with no gaps or overlaps. Measure and Move builds that idea with tiles, then moves to rulers, unit sizes and length problems.

Already have an unlock code? Unlock this pack, then open it in FireFlash.

One unit length One tile, a piece used to measure. The words say unit length. unit length
Length measurement counts consecutive equal-sized intervals with no gaps or overlaps.

What students investigate

Students lay unit tiles end to end, choose a ruler, tape measure or meter stick, and meet centimeters, inches, feet and meters. They line an object up at zero and read a ruler that starts somewhere else.

Later cards show why the same object needs more small units, estimate from a benchmark, find how much longer one length is, join and cut lengths in story problems and jump on a number line.

Who it is for

Measure and Move is written for Grade 2 and pairs with Graphs Tell Stories, which plots measured lengths.

Every card is silent, so the pack works on a classroom screen or on student devices in a quiet room.

What students learn

10 learning ideas, one at a time. Each one is a silent animated Learn card, then Review and Mastery questions.

  1. Length measurement counts consecutive equal-sized intervals with no gaps or overlaps.
  2. Choose a measuring tool with a suitable unit scale for the object.
  3. The unit must fit the size of the thing being measured and be named with its number.
  4. An object whose left endpoint meets the zero mark has length equal to its right-end ruler reading when ticks are equal intervals.
  5. If measuring starts after zero, subtract the start mark from the end mark.
  6. A smaller standard unit needs more repeated units than a larger standard unit to measure the same unchanged length.
  7. A reasonable length estimate comes from comparing the object with a known nearby unit length before checking with a measuring tool.
  8. Lengths measured in the same unit can be compared by subtracting their endpoint values or counting unmatched equal intervals.
  9. In a length story, add or subtract measurements that use the same unit.
  10. On a number line, equal number steps have equal spaces.

Science words in this pack

Each word is taught on its Learn card, then used again in Review and Mastery.

  • unit length
  • gap
  • overlap
  • ruler
  • tape measure
  • meter stick
  • centimeter
  • inch
  • meter
  • foot
  • zero mark
  • endpoint
  • shifted ruler
  • unit size
  • estimate
  • benchmark
  • length difference
  • total length
  • length left
  • number line
  • jump

Inside the pack

How it works in class

  • Learn. 10 silent whiteboard animations, one idea per card. No audio, so it works on a classroom screen or a quiet device.
  • Review. 30 practice questions with feedback. Ideas a student misses come back.
  • Mastery. 30 questions to show what each student knows on their own.
  • Certificate. A student who finishes can print a certificate or save it as a PDF. It shows first-try Review and Mastery results and the ideas that needed a retry.

Standards connections

These cards support parts of the following NGSS performance expectations. They do not replace hands-on investigations.

  • 2.MD.A.1 — core ideas
  • 2.MD.A.2 — core ideas
  • 2.MD.A.3 — core ideas
  • 2.MD.A.4 — core ideas
  • 2.MD.B.5 — core ideas
  • 2.MD.B.6 — core ideas

Questions teachers ask

How do I open it after buying?

Enter your unlock code on the Unlock page, then share the pack with students from Share with students.

Does it cover every Grade 2 math standard?

No single resource does that. The pack supports the standards listed on its Start Here sheet and sits alongside your own teaching.

Get Measure and Move

Already have an unlock code? Unlock this pack, then open it in FireFlash.

More in FireFlash 2nd Grade Math

About the FireFlash 2nd Grade Math series